This is an example of inspecting the appearance of a winding coil. Inspections like this are sometimes unstable due to lighting reflections and color...
Continuous Measurement of Casting Machine Oscillations
To reduce the signs of oscillation, mold oscillation is controlled quantitatively. With high-speed sampling of 392 kHz, the Ultra High Speed Laser D...
The measuring head is installed in a heat-resistant housing to continuously monitor and provide feedback on the level of plating thickness. Monitoring...
Measurement of Welding Position on Tubes Welded with Electric Resistance Welding
During welding of electric resistance welded tubes, the difference in height and width between the edges of the material is measured with a blue laser...
Conventionally, incorrect marking positions occur due to incorrect placement and misalignment of the jig resulting from manual work. To perform positi...
Measurement of Diameter and Roundness on Inner Race
High Speed 2D Optical Micrometer measures the inner diameter of the inner race and roundness. Conventionally, optical comparators are used to carry...
Raceway Track Position Measurement (Difference Inside and Outside)
The inner and outer parts of the bearing are distinguished by measuring the position of the raceway groove. Conventionally, these measurements have be...
The LJ-V series detects scratches on the top and side surfaces of the outer wheel. Conventionally, these scratches are detected visually, but with the...
The edges of the seal peel easily so the High Speed 2D Laser Profiler was used to check for this problem. In addition, because the location where st...
Measuring the Curvature of Electronic Component Cables
The pitch and position of the cable ends are measured. With the Image Dimension Measurement System, non-contact measurements can be carried out withou...
The measurement system to be used is selected based on several aspects such as outer diameter, length, groove diameter and position, corner radius, an...
